Call (406) 998-1481

Home / Services / Cable repair

Snapped, frayed or slipped cables

Garage Door Cable Repair in Billings, MT

Lift cables carry the weight of the door. A frayed, slipped or snapped cable can make the door drop, hang crooked or jam. Do not run the opener. Call (406) 998-1481.

Garage door cable repair tools in Billings, MT

What Garage Door Cables Do

Lift cables run from the bottom corners of the door up to drums on the bar above it. They work with the springs to raise and lower the door evenly. When a cable is damaged or slips, one side loses support and the door can tilt, drop or jam.

How Do You Know a Garage Door Cable Is Bad?

  • One side of the door hangs lower than the other
  • A cable is loose, slack, frayed or hanging
  • The cable has come off its drum above the door
  • The door jerks, tilts or jams while moving
  • You heard a bang or snap, then the door stopped working properly

A loose cable is often a sign that something else failed, such as a broken spring. If the door is stuck with a car inside or the home is open, see emergency garage door repair.

What to Do If a Cable Breaks

  • Keep people and pets clear of the door and the area underneath it.
  • Do not run the opener and do not try to lift, lower or reposition the door.
  • Do not touch the cable, spring or bracket. They can be under tension.
  • Take photos if it is safe, showing both sides of the door and the cable.

What Causes a Garage Door Cable to Fail?

Wear and fraying

Cables wear where they wrap on the drum and at the bottom bracket, and strands break over time.

A broken spring

When a spring fails, the cable goes slack and can slip off its drum.

Impact or an off-track door

A hit to the door can bend brackets or pull a cable out of place.

Rust and moisture

Moisture that sits at the bottom corners can corrode the cable and bracket.

Cables, Springs, Drums and Tracks

These parts work as one system, so a cable problem often involves another part. A slack cable can mean a failed spring, see garage door spring replacement. A door that has come off its track can damage a cable, see off-track garage door repair. If the door will not respond at all, check garage door opener repair.

Why You Should Not Use or Fix the Door Yourself

A cable under tension that lets go can let one side of the door fall or twist. The cable and its bracket also hold spring tension, which is why we do not give DIY steps for this repair. Using the opener with a damaged cable can bend the door and damage the opener.

What a Professional Cable Repair Involves

  • Securing the door so it cannot fall
  • Inspecting both cables, the drums, the bottom brackets, the rollers and the springs
  • Replacing the damaged cable, commonly as a pair when one is worn
  • Checking the balance and the safety reverse before the door is used again

What Affects the Cost of Cable Repair?

The price depends on whether one or both cables are replaced, whether the drums, brackets or springs are also damaged, and the size and weight of the door. Ask for the price when you call.

What Happens When You Call

  1. You describe what you saw and heard.
  2. We ask a few safety questions, such as whether the door is open, closed or crooked.
  3. We confirm availability for your address in Billings on the call.
  4. A technician inspects the door and explains what is needed.

Garage Door Cable Repair FAQs

Can I use my garage door with a broken cable?

No. A broken cable can let the door fall or jam. Stop using it and call.

Can I fix a garage door cable myself?

No. Cables and their brackets are under tension and can cause serious injury. Leave this to a technician.

Should both cables be replaced?

Cables are commonly replaced as a pair when one is worn. The technician will check the other.

What causes a garage door cable to snap?

Wear, a broken spring, an impact or off-track door, and rust. A slack cable can also mean the spring failed.

Is a broken cable an emergency?

It is urgent if the door is stuck open, stuck with a car inside, or hanging crooked. Keep clear and call.

Call (406) 998-1481 or use the contact page.