Home / Services / Opener repair
Motor, remote and sensors
Garage Door Opener Repair in Billings, MT
An opener that is dead, humming, reversing or stopping partway has a handful of likely causes. Check the safe basics below, and call (406) 998-1481 when the door is heavy, the motor runs without moving it, or the sensors keep failing.

What Is Your Garage Door Opener Doing?
Match the symptom to the usual cause. This is a guide only. A technician confirms the cause.
| Symptom | Usual cause |
|---|---|
| No lights, no sound | No power, tripped breaker or failed unit |
| Motor hums, door does not move | Broken spring, or the door is disconnected from the opener |
| Remote fails, wall button works | Dead battery or lost programming |
| Door reverses or will not close | Sensors dirty, blocked or out of line, or limits set wrong |
| Stops partway | Travel limits, or a stiff or unbalanced door |
| Loud grinding | Worn gear, rollers or hinges |
Motor humming or running with no door movement? See opener humming but not moving. Door opens then stops? See garage door opens then stops.
Checks That Are Safe to Do Before You Call
- Make sure the opener is plugged in and the breaker is on
- Replace the remote battery
- Gently wipe the safety sensor lenses and check that both sensor lights are steady
- Check the lock setting on the wall control
- Look at the door without touching springs or cables
Do not open the motor housing or touch wiring, and do not force the door. If the door looks crooked, sags, or feels very heavy, stop and call. A broken spring is a common cause, see garage door spring replacement.
Common Opener Problems We Repair
- Remote and wall control problems
- Opener that runs but does not move the door
- Door that reverses, stops partway or opens only some of the time
- Grinding or unusual noise from the opener
- Opener that is dead or has lost power
- Worn gears, drive or circuit board problems, confirmed by a technician
If the problem is only the safety sensors, see garage door sensor repair. If the door is off its track or a cable is loose, see off-track repair or cable repair. If it is stuck with a car inside, see emergency garage door repair.
Repair or Replace Your Opener?
Openers commonly last around 10 to 15 years. Replacement is worth considering when the opener is old and failing, or when parts are hard to find. Residential openers made on or after January 1, 1993 must have entrapment protection such as photo-eye sensors (CPSC). If yours has no sensors near the floor, it was probably built before then, and replacing it is the safer choice. See garage door opener installation for new openers.
Do Not Skip the Safety Reverse
Never disable or bypass the safety sensors or the auto-reverse. They protect people and pets under the door. A technician can check that they work before the door is used again.
What Affects the Cost of Opener Repair?
The price depends on what failed, the age and type of the opener, whether a part is available, and whether the door itself, such as a spring, also needs work. Ask for the price when you call.
What Happens When You Call
- You describe what the opener is doing.
- We ask a few safety questions, such as whether the door is open, closed or crooked.
- We confirm availability for your address in Billings on the call.
- A technician inspects the opener and the door and explains what is needed.
Garage Door Opener Repair FAQs
Why does my opener run but the door does not move?
Often a broken spring, or the door has been disconnected from the opener. Do not force the door. Keep clear and call.
Why does my remote not work but the wall button does?
Usually a dead remote battery or lost programming. Try a new battery first.
Why does my garage door reverse when closing?
Often dirty, blocked or misaligned safety sensors, or travel limits set wrong. Wipe the sensor lenses and check that both lights are steady.
Can I bypass the safety sensors?
No. They protect people and pets. Never disable the sensors or the auto-reverse.
Should I repair or replace an old opener?
Consider replacement when the opener is old and failing, or parts are hard to find. A technician can advise after inspecting it.
Call (406) 998-1481 or use the contact page.