Call (406) 998-1481

Home / Problems / Won’t open

Troubleshooting

Garage Door Won’t Open: Causes and Fixes

If your garage door will not open, check the remote battery, the power, the lock and the manual release first. If you heard a bang or the door feels very heavy, a spring has likely broken. Call (406) 998-1481.

Quick checks before you call

  1. Try the wall button. If it works, the remote battery or programming is the problem.
  2. Check power. Make sure the opener is plugged in and the outlet or breaker is on.
  3. Look at the lock. Many wall controls have a lock button that blocks the remotes.
  4. Check the manual release. If the red cord was pulled, the door is disconnected from the opener.
  5. Look for ice or debris along the bottom edge and in the tracks.

Common causes

SignLikely cause
Opener hums, door does not moveBroken spring or disconnected trolley
Loud bang, door feels heavy by handBroken torsion or extension spring
No response from remote, wall button worksDead battery or remote needs reprogramming
Nothing works, no light on openerNo power, tripped breaker or failed unit
Door frozen to the floorIce on the bottom seal

Do not force it

If the door will not lift by hand or the opener strains, stop. A broken spring leaves the door at full weight, and forcing it can damage the opener or cause injury.

Common questions

Why won’t my garage door open with the remote?

A dead battery, the wall-control lock, or lost programming. Try the wall button to tell which.

Why does my opener run but the door doesn’t move?

The trolley may be disconnected, or a spring has broken and the opener cannot lift the full weight.

Can I open the door manually?

Pull the red release cord and lift. If the door is very heavy, do not lift it; a spring may be broken.

Related guides

Spring replacement

If a spring broke.

Read more →

Opener repair

If the motor runs.

Read more →

Emergency repair

Stuck closed.

Read more →

Not sure what is wrong with your door?

Call and describe what it is doing. You get a straight answer on the next step before any work starts.