Call (406) 998-1481
Troubleshooting
Garage Door Reverses After Closing: Causes and Fixes
A door that closes and then goes back up is using its safety reverse. The cause is usually a sensor beam that is blocked or off line, travel limits that are set wrong, or something in the way. Call (406) 998-1481 if the checks below do not fix it.
What to check
- Sensors: clear, clean and re-aim the photo eyes until both lights are steady.
- Obstruction: look at the floor and the bottom seal for anything the door touches.
- Travel limits: if the door hits the floor and reverses, the down limit may need adjusting per your opener manual.
- Close force: a worn or stiff door may need a balance check first.
- Cold weather: a stiff bottom seal can trigger the reverse.
Never disable the safety reverse. It protects people and pets under the door.
Common questions
Why does my garage door go back up when it hits the floor?
The down travel limit may be set too far, so the opener reads the floor as an obstruction.
Is it safe to bypass the sensors?
No. Entrapment protection is required on residential openers made since 1993.
Related guides
Not sure what is wrong with your door?
Call and describe what it is doing. You get a straight answer on the next step before any work starts.